WangSpec

New photos of the WangSpec JZA80 Single turbo aluminum airbox prototype.

The main body is SLM 3D printed AlSi10Mg, paired with a clear polycarbonate lid and a AFE filter.

Read the latest development details here:
https://wangspec.us/blogs/news/built-to-breathe-aluminum-air-box-prototype-for-mkiv-toyota-supra-pt3

Toyota doesn't sell this part separately.

So we reverse engineered it, and improved it.
• Thicker wall for reduced deflection
• Integrated threaded b**g (no spot weld failure)
• OEM-like fitment

Free STL download now available on our website.
Personal use only. More info, and Link in bio.

The long-awaited fitment photos are here.

Type B JZA80 Supra Intake Airbox Prototype (AlSi10Mg)
Fitment validated.

Intake pipe shown is custom for my setup.

Testing is next.

Development Progress.
Toyota Supra JZA80 Induction Airbox

Prototype main body 3D Printed Aluminum (AlSi10Mg) via SLM.

This has been in development behind the scenes for a while.
First round of fitment and validation testing on my personal Supra begins soon.

More to come.

Stay tuned.

The Question Everyone Asked: Does it clear Big Brakes?

Most of our recent inquiries have been about BBK fitment.
Today, we're ending some of that guess work.

Here is an example of our one-piece 3D Printed 316L Stainless Steel brake duct shields in our earlier finish, installed on 's immaculate Supra with ST60 front brake kit.

Due to the nature of 3D printing, we were able to keep a one piece design with an organic shape to channel the air flow to the center of the brake rotors smoothly.

By Design, these will have more clearance on a BBK, than the USDM Stock 4-Piston/320mm Rotor Combo.

Made to order, link in bio, and don't forget to give Tuan a follow!

JZA80 Toyota Supra Bumper Ducts are now live!

End of 2025 drop: MKIV Supra (97+) Front Bumper Ducts are live. Two sizes depending on what you’re building: 50mm → pairs with our Front Brake Duct Shields (same hose size) 75mm → more airflow for custom oil/trans cooler ducting Details: ✅ Sold as a PAIR (LH + RH) ✅ 3D Printed in ASA-CF (black) ✅ Mounts to Series II (97+) OEM turn signal studs (includes sleeve nuts) ⏳ Made-to-order: typical 10–15 business days before shipment (details in bio) Photos shown include 75mm + 50mm examples. #wangspec #toyotasupra #wherepassionmeetsgreatness #jza80スープラ #jza80 #mkivsupra #ducting

Update on the JZA80 Bumper Ducts

After multiple prototype iterations, these recent fitment tests in PLA looks promising. Next round of testing, we will move to ASA for improved heat and UV resistance.

3D-Scanned, and modeled from a Brand-new OEM Toyota Bumper - Every curvatures has been fine tuned to get fitment as close to OEM as possible.

These are intended to fit with Series II turn signals only. Follow us for more updates.

Prototype Bumper Ducts
Application: Toyota Supra Mkiv JZA80

Type A: Open for maximum flow
Type B: Meshed for Street cars

50mm hose outlet.
Material : TBD (Final version under evaluation)

Fitment Verifications next. Stay Tuned.

Which one would you run in your Supra?

❄️ Keep Your Brakes Cool. Keep Laps Consistent.

New WangSpec Front Brake Duct Shields for the JZA80 Supra & Z30 Soarer are now live.

📐 3D-printed Stainless or Titanium
⚡ Directs airflow straight into the rotor hub
🔒 OEM-like fitment, no shortcuts

📦 Now available — order via link in bio.

Hope everyone’s sending it this 4th of July. Stay safe, stay building. More Airbox updates are live on the blog.