Hill Country Forced Induction

Hello everyone.

Unfortunately our local cell tower went down and we do not have any service or internet right now.

At this time we are unsure when it will be back up.

If you message us on any email, social media platforms or are trying to call or text us you will not get a response. Please do not think we are ignoring you.

We will make an updated post once everything is back up.

Thank you!

Custom HCFI Subaru VF series turbo with all the upgrades.

This turbo is one of our HCFI VF series lineup with a number of added options.

Most notable is the stock size inlet T51r mod! You will not find any other VF series turbos on the market with this as an available option other than from us at HCFI.

This turbo also received a dual ball bearing conversion, G25-550 9 blade billet compressor wheel and a G25 profiled D5 5+5 blade turbine wheel.

This turbo is capable of over 400whp with supporting mods and fuel while keeping spool up close to stock.

As always, this turbo also received powder coat finish on the compressor housing in wrinkle black and a black ceramic coating on the turbine housing.

An absolutely killer setup right here!

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/subaru/

As a reminder, all of our turbos are built to order. We are super busy this time of year and will be moving as quickly as we can. Thank you for the patience as always 🙏-Adrian

HCFI G25-550 spec stock location turbocharger

This is one of our G series spec turbos for the Subaru stock location setups.

All of our G series setups include the following

-dual ceramic ball bearings
-billet bearing cages
-staggered oil seals
-point milled billet compressor wheels
-D5 5+5 blade turbine wheels
-all gaskets, oil feed and return lines and coolant lines
-billet adjustable wastegate actuator
-black ceramic coating on the turbine housing

This particular turbo also received the optional 3" compressor housing with a wrinkle red powder coat finish.

If you are interested in one of our G25 spec turbochargers for the Subaru stock location fitment, they can be found here.

https://hillcountryforcedinductions.com/subaru-stock-location-g25-series/

HCFI G series!

This is one of our stock location G series turbochargers for the Subaru platform.

We offer these in the G25, G30 and G35 lineups.

Multiple options for all of these which include the following

-Point milled billet compressor wheels
-D5 5+5 blade turbine wheels
-dual ceramic ball bearings with billet bearing cages
-billet adjustable wastegate actuators on the IWG setups
-2.5" and 3" compressor housings
-T51r mods
-multiple sizes for turbine housings
-oil feed, coolant and oil drain lines included as well as up pipe/down pipe gaskets
-powder coating choice on the compressor housing
-black ceramic coating on the turbine housings

If you are interested in one of our turbos, you can find them here.

https://hillcountryforcedinductions.com/subaru/

Custom HCFI VF48 turbo

This is one of our custom VF48 frame turbochargers with all the upgrades!

Along with our standard billet thrust bearing, journal bearings and staggered oil seals, this turbo received the following.

-58mm T51r style compressor housing mod
-G25-550 9 blade point milled billet compressor wheel
-TD05h sized 9 blade turbine wheel
-wrinkle red powder coat finish on the compressor housing
-black ceramic coating on the turbine housing
-gasket matched/knife edged porting

This turbo is absolutely killer with power capabilities into 400+whp.

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf48/