The KartList TT

1 Pint Epoxy Resin + 1 Pint Hardener ($215)
Total = Almost 1 litre when combined

*Table Top Epoxy Resin -Used for resin crafts and table tops*

•Complete Curing time 24-72 hours

•Mixing Ratio- 1:1 by volume (Must be exact amount of Resin mixed with the exact amount of Hardener - Use measuring cup for exact measurements)

• Apply up to 1/4 inch per coat
Total = Almost 1 litre

*Store in a COOL/Dark place (e.g a box covered with a cloth , closet, )
*Heat/Sunlight will cause Hardener to turn yellow over time .

SAFETY PRECAUTIONS: Wear safety glasses at all times
while handling. Wear latex gloves and avoid getting product on skin. Plastic aprons can prevent
product from getting onto clothing and soaking through to the skin. Avoid inhalation of any fumes
from the product and use in a well-ventilated area.

MIXING: The proper ratio is 1-part hardener to 1-part resin. Improper mixing will cause soft or tacky
spots in the surface.
• First, be sure you are preparing to mix containers of Hardener and Resin. Double-check your labels
to ensure the proper materials are being mixed.
• Graduated mixing containers are recommended for measuring and mixing. Batches should not
exceed 1.5 gallons total. If more than 1.5 gallons is needed at once, make multiple small batches.
• Hand mixing with a paint stir stick is recommended. While mixing, stir continuously while also
sweeping the sides and bottom of the mixing container. Do so in a fluid and steady manner, as it is
important to mix without introducing air into the mixture.
• Total mixing time should take approximately 3 minutes.
• The product may cloud a little during mixing but will clear as mixing nears completion. After mixing
is complete, allow the mix to stand 3-5 minutes. After 3-5 minutes, remix for approximately 30
seconds

resintrinidad trinidad trinidadandtobago resintrinidadandtobago resinarttrinidad trinidadandtobago🇹🇹 jewellery jewellerydesign jewellerymaking business businesskit businessstartup trending resinmolds Resin tabletopresin epoxy epoxyresin epoxytrinidad trinidadandtobago