Scanning Electron Microscope Analytical Service by Absotec Co.,Ltd

Key Differences: High Vacuum (HV) Coater vs Low Vacuum (LV) Coater

High Vacuum (HV) Coater and Low Vacuum (LV) Coater are both used to deposit conductive thin films (e.g., Au, Pt, Pd, C) for SEM/FE-SEM sample preparation, but they operate under very different vacuum conditions and are suited for different sample types and coating goals.

⸻

1) Operating Pressure / Vacuum Level

HV Coater
• Works at high vacuum (typically ~10⁻⁴ to 10⁻⁶ mbar range, depending on system)
• Requires better pumping performance (often turbo pump + backing pump)

LV Coater
• Works at low vacuum / higher pressure (typically ~10⁻¹ to 10⁻² mbar range)
• Usually uses simpler pumping (rotary pump) and controlled gas environment

✅ Main difference: HV = cleaner, lower pressure / LV = higher pressure with more gas present.

⸻

2) Coating Quality and Film Purity

HV Coater
• Produces cleaner, higher purity films
• Better for high-resolution SEM/FE-SEM
• More consistent for ultra-thin coatings (e.g., 1–5 nm)

LV Coater
• Film can be slightly less dense / lower purity
• More scattering due to higher gas pressure
• Often thicker coatings are used compared to HV

✅ HV wins when you need the best coating for high-resolution imaging.

⸻

3) Grain Size / Surface Detail Preservation

HV Coater
• Can produce finer grain coatings (especially with Pt/Pd and turbo systems)
• Better for preserving nano-scale surface morphology

LV Coater
• Coatings tend to have larger grains and may mask fine details
• More suitable for routine SEM work

✅ For FESEM-level surface detail, HV is preferred.

⸻

4) Charging Control on Difficult Samples

HV Coater
• Good charging reduction for most insulating samples, but relies on a very clean vacuum and uniform film
• Best when the sample is stable under high vacuum

LV Coater
• Often better for porous, wet, or outgassing samples (or samples that are vacuum-sensitive)
• Gas environment can help reduce charging in some cases

✅ LV is more forgiving for samples that cannot tolerate high vacuum easily.

⸻

5) Coating Speed and Workflow

HV Coater
• Typically needs longer time to reach high vacuum (pump-down time)
• Coating process is stable but startup may be longer

LV Coater
• Pump-down is generally faster and less strict
• Easier for “quick coat and go” workflows

✅ LV often provides faster routine turnaround, while HV provides better final quality.

⸻

6) Typical Applications

High Vacuum Coater (HV) — best for
• FE-SEM / high-resolution imaging
• Nano-structures (nanoparticles, nanofibers, thin films)
• Clean, uniform conductive coatings
• Ultra-thin metal coatings (1–5 nm)

Low Vacuum Coater (LV) — best for
• Routine SEM sample prep
• Larger samples with moderate resolution needs
• Porous samples, biological samples, samples prone to outgassing
• Fast throughput environments

⸻

7) Cost and Maintenance

HV Coater
• Higher system cost (turbo pump, more sensors, more controls)
• More maintenance complexity
• Requires higher vacuum cleanliness (oil control, contamination management)

LV Coater
• Lower cost
• Simpler maintenance
• More tolerant to contamination and user variability

✅ HV = higher performance, higher cost
✅ LV = practical, lower cost, easier operation

⸻

Quick Summary (Sales-friendly)

High Vacuum Coater = premium-quality, ultra-thin, fine-grain coating for FESEM and nano-detail work.
Low Vacuum Coater = faster, simpler coating for routine SEM and vacuum-sensitive/outgassing samples.

More information pls contact us at: [email protected]

เชิญชวนร่วมงานสัมมนา ณ มหาวิทยาลัยแม่โจ้
วันที่ 8-9 กันยายน 2568 แอบโซเทคเป็นผู้นำเสนอร่วมในเครื่อง LVEM25E by Mr. Emad Shahnam brand Delong Instrument

It was such a joy to hold a seminar and live demo at the Medical Faculty of Mae Fah Luang University in ChiangRai,Thailand. We are deeply thankful for the warm welcome and the chance to meet such passionate and talented faculty, researchers and medical students. It’s inspiring to see how committed this institution is to excellence in education and research.
I truly hope our all sample preparation devices such as RMC bocekeler Ultramicrotome, RMC bocekeler Tissue Processor, Safematic CDS-020 Auto CPD with dehydration, Safematic CCU-010 HV coater system will support your incredible work for Electronmicroscopy labs . I look forward to meaningful collaboration ahead!.

📌Scanning Electron Microscope (SEM Tabletop) Brand: COXEM Model:EM-40.The EM-40 represents COXEM's latest addition to their expanding family of Tabletop SEMs. The EM-40 comes with ultra-fast 5th-generation signal processing technology and provides high-quality imaging at frame rates of up to 13 fps. Four imaging modes (Fast, Slow, UltraFast, and Photo) allow the user to choose the image quality and speed that best fits their application.

📌 RMC Boeckeler’s PowerTome is a fully modular ultramicrotome, upgradable from a routine to an advanced instrument. Known for its durability, its power-driven cutting stroke will enable you to slice through a wide variety of materials ranging from softer to extremely hard materials. As such, the PowerTome is used for research in many different industries ranging from life sciences to materials sciences.

📌 Safematic CDS-020 Compact Drying System
Two processes in one device? Yes, it is possible with our brandnew, patented, fully automatic CDS-020 for dehydrating and critical point drying.

📌 Safematic CCU-010 high vacuum sputter and carbon coater was designed for the highest demands in the field of sample preparation. Premium components and a smart design allow excellent results in ultra-high-resolutionapplications. Our device is a compact, fully automatic sputter coater and/or carbon coater. The CCU-010 HV base unit pumping system is totally oil-free and includes a high performance turbo pump and diaphragm backing pump, both internally located, giving the coater a very small footprint (no cumbersome rotary pump and vacuum lines).

More information please don’t hesitate to contact us at [email protected] or +66838242235 Absotec is an exclusive distributor in Thailand 🇹🇭 for all devices.

Boeckeler