DTF Philippines

st used onto polyester and other non cotton fabrics that are difficult to print using traditional DTG printing. DTG is designed predominantly for cotton garments, DTF will never replace DTG for cotton printing, but it is a good alternative when starting off in business due to its lower level of investment for a stand alone version or a fully automated system for mass production transfers. DTF Philippines have been at the forefront of inkjet printing for many years, DTF is an exciting addition to garment decoration that cannot be ignored. If you have shied away from DTG printing in the past because of the pre-treatment process required when using white ink, DTF breaks this cycle and requires no pre-treatment but still offers the soft hand water based ink produces. Because the durability is enhanced by the special ink and adhesive, DTF printing is ideal for workwear like overalls, high viz, gym and cycling wear. It doesn’t crack like screen printing means has a very soft hand due to the water-based ink used. Our custom built DTF Printers system is designed and built from the ground up and uses the same dual print head technology. Printing 10m2 an hour with fully automated curing and adhesive application DTF Philippines is one of the fastest fully automated DTF Printers available in the Philippines our dual print head technology produces fast single pass prints in high resolution. The quality and vibrancy of the finished garment we feel is the best available. DTF Philippines is now accepting DTF Printing services in a very low cost with a maximum width of 24 inches.