The Ride-On Tyre Protection System ("Ride-On TPS")- a revolutionary line of tyre sealants formulated to prevent flats caused by punctures from nails, thorns, screws and other debris. Just a few of the features and benefits of Ride- on on TPS Sealants are:
Safety: by maintaining set- point pressures longer, then tyres maintain their optimum inflation pressures, run cooler and with puncture sealin
g will reduce potential safety issues with vehicle roll- overs and blow outs. Fuel Savings and Performance: It is a fact, maintaining correct tyre pressures means less road pe*******on (dirt) less rolling resistance and so increases fuel economy- up to 5% in Transport Industry. Air Pressure - eliminates porosity leaks: Independent fleet tests have proven that tyres containing Ride-On maintain their set point pressures up to 500% better than untreated tyres and reduced tread wear and increase tyre service life. Road Maintenance: Mining / earthmoving / construction where unsealed roads are utilised, less tyre pe*******on means reduced road maintenance. Balanced Tyres / Dampen Vibration: Hydrodynamically balances tyres. Ride-On will dynamically act to dampen vibrations for the life of the tyre so they do not need periodic re- balancing and will not clump up or clog valve stems like powder balancer's will. Corrosion Protection: Will not harm tyres and wheels- Ride- on TPS Tyre Sealants contain specialised additives to provide protection of your rims against corrosion. Cooler Tyres / Casing Life: Less flexing, bounce and fatigue means cooler tyres and enhanced casing life. Reduces Downtime / Puncture Sealing: Prevents flats, seals multiple punctures up to 13.0 mm (1/2") in diameter, slow leaks, vent holes, bead seats and o-ring leaks. Makes any tyre into a self-sealing tyre by eliminating 85-95% of flat tyres due to punctures in the crown of a tyre, we can keep your fleet running, reduce costly road service calls, and eliminate run-flats. Retreading / Repairs: Ride- on TPS Sealants will not interfere with major repairs and because is conditions the Rubber / Tyre Casing then increases the potential for retreading tyres. Mounting / De- Mounting- Saves labour: Helps with mounting and de-mounting of off-road, industrial, mining and agricultural tyres. High heat can cause a tyre to weld itself to a rim, resulting in hours of labour spent trying to break free the tyre bead and ultimately resulting in damage to the tyre and rim. Safe to use: Non-flammable, non-hazardous, biodegradable. Water dispersible: Washes out with plain water leaving no residue. Ride-On will not interfere with the application of boots, section or tyre plug and patch repairs. Suitable for all weather conditions: Specially formulated to prevent freezing at extremely low temperatures -40 DegC and separation at high temperatures. Greening: as Ride- on TPS is biodegradable / water soluble then using / disposing of our formulations assist users with reducing their Carbon Footprint - see our Going Green section on our web site. Ride-on has a wide range of applications and makes and models that it can be applied to. The Ride-On tyre Protection System (“Ride-On TPS”) is a revolutionary line of tyre sealants (tyre sealants) formulated to prevent flats caused by punctures from nails, thorns, screws and other debris. Ride-On TPS tyre sealants (tyre sealants) extend tyre (tyre) life by hydrodynamically balancing tyre/wheel assemblies, lowering tyre (tyre) operating temperatures and helping tyres (tyres) maintain their set-point pressures. Vehicles with Ride-On TPS benefit from better handling, better fuel economy, longer lasting tyres (tyres) and a safer ride. Ride-On TPS tyre sealants (tyre sealants) also help to reduce the expense and aggravation of flat tyres (tyres) and premature tyre (tyre) failures. Ride-On TPS comes in several formulations for use in both high-speed, on-road as well as slow-moving, off-road applications.
