Fluke Process Instruments Sri Lanka

🌡️ The Curing Standard: Datapaq Oven Tracker XL2.

The Datapaq Oven Tracker XL2 is the global benchmark for temperature profiling in the automotive and industrial coating sectors. Engineered to ensure perfect paint finishes and powder cures, it transforms raw oven data into instant quality assurance at the oven exit. 🚗🎨

🔹 SmartPaq Instant QA: Features a "Pass/Fail" LED indicator at the oven exit. A green light confirms your pre-programmed cure criteria were met, while a red light warns of a process deviation before the product even cools.
🔹 Multi-Run Efficiency: Store up to 10 consecutive profile runs in the internal memory. This allows technicians to test multiple lines or batches without needing to return to a PC to download data.
🔹 Automotive Grade: Patented silicone-free thermal barriers eliminate the risk of surface contamination (fish-eyes), ensuring a flawless finish for high-stakes automotive and appliance lines.
🔹 High-Channel Logic: Available in 6 or 8-channel configurations. For comprehensive studies, use the Dual Interface Block to link two units for up to 16 measurement points in a single pass.
🔹 Rugged Thermal Shielding: Combined with stainless steel barriers and phase-change heatsinks, the logger is protected in environments up to 600°C, ensuring data integrity even during conveyor delays.

In a world of critical finishes, the Datapaq XL2 is your guarantee of consistency.

Stop the Guesswork. Start the Cure. The Datapaq® EasyTrack®3.

Is your powder coating fully cured? "Near enough" isn't good enough for your customers. The Datapaq EasyTrack3 travels through your oven to give you a definitive "Cure Index" for every run. It’s rugged, simple to use, and generates the professional reports you need to win more business and eliminate rework. 🛠️✅

🔹 6-Channel Precision: Monitor air and surface temps simultaneously
🔹 Proven Reliability: Survives the heat of your oven, run after run
🔹 Easy Analysis: Insight™ software calculates your "Cure Value" automatically
🔹 Instant Proof: Generate PDF quality reports in seconds

Professional results made easy.

The Gold Standard for Automotive Paint: The Datapaq® AutoPaq®.

Achieving the perfect finish on a vehicle body isn't just about the paint, it's about the heat. The Datapaq AutoPaq system travels with the car shell through the oven, using up to 20 channels to ensure every weld and panel is cured to perfection. With its 100% silicone-free design, it guarantees a defect-free surface every time. 🛠️✨

🔹 Complete Coverage: Monitor up to 20 points on a single car body
🔹 Silicone-Free: Zero risk of paint contamination or "fish-eyes"
🔹 Live Insights: RF Telemetry for real-time process monitoring
🔹 Expert Software: Automated validation for automotive cure standards

Turn oven guesswork into scientific certainty.

See through your oven walls with the Datapaq® Food Tracker®.

In food processing, "guessing" is a safety risk. The Datapaq Food Tracker travels with your product through ovens, fryers, and freezers to give you a true temperature profile. With automated Fo lethality calculations and a rugged IP67 waterproof design, it’s the ultimate tool for HACCP validation and maximizing your yield. 🛠️📈

🔹 Through-Process Precision: Measures exactly what your food experiences
🔹 Fryer to Freezer: Survives oil submersion and blast freezing
🔹 Smart Reporting: Instant HACCP-ready reports and lethality data
🔹 Live Telemetry: Watch your cook cycle in real-time from your PC

Quality you can prove. Safety you can trust.

🛡️ Perfect Joints, Every Run: Datapaq® Brazing Profiling Systems.

Aluminum brazing is a game of degrees. A few degrees too low and the joint fails; too high and the part melts. The Datapaq Furnace Tracker for CAB and Vacuum Brazing takes the guesswork out of the furnace. By traveling with your product, it records the exact thermal journey of your parts, helping you identify hot/cold spots and ensure total uniformity. 🛠️✨

🔹 Clean Vacuum Design: Minimized out-gassing for pristine vacuum brazing
🔹 Flux Resistant: Rugged CAB barriers built for harsh atmospheres
🔹 Real-Time RF: See your brazing cycle live as it happens
🔹 Compliance Ready: Automated reporting for AMS2750 and CQI-9

Stop testing by trial and error. Start profiling with Datapaq.

Precision in the Void: The Datapaq® Vacuum Heat Treatment System.

High-pressure gas quenches and deep vacuums are no match for the Datapaq Furnace Tracker. Designed to travel inside your vacuum furnace, this system captures precise thermal profiles without the risk of leaking seals from trailing leads. With the rugged TP6 logger and vacuum-rated thermal barriers, you get the data you need to satisfy AMS2750G and CQI-9 audits every time. 🛠️⚡

🔹 Pressure Proof: Operates in vacuums and pressures up to 20 Bar
🔹 High Heat: Thermal protection for processes up to 1200°C
🔹 Waterproof & Tough: IP67-rated 316 stainless steel logger survives the quench
🔹 Total Compliance: Automated TUS reporting via Insight™ software

Unlock the secrets of your vacuum cycle and guarantee part quality.

🔥 Stop guessing. Start profiling. The Datapaq® Furnace Tracker® up to 1050°C.

In the world of high-stakes metallurgy, "near enough" isn't good enough. The Datapaq Furnace Tracker travels directly through your furnace and quench tank, capturing the exact thermal journey of your product. With a rugged IP67-rated TP6 logger and advanced TB49 thermal barriers, you get lab-grade precision in the heart of the heat. 🛠️📈

🔹 1050°C Ready: Specialized thermal barriers for extreme metal-treating cycles
🔹 Waterproof Power: Survive the furnace AND the quench with IP67 protection
🔹 Full Compliance: Automated TUS reports for AMS2750 and CQI-9
🔹 Live Data: RF Telemetry lets you see inside the furnace in real-time

Optimize your recipes, reduce scrap, and guarantee quality.

Small Head. Big Intelligence: The Fluke Raytek® MI3.

Don't let limited space limit your data. The Raytek MI3 features a miniature sensing head that fits where others can't, while the modular communication box can manage up to 8 heads at once. It’s the ultimate high-performance, low-cost solution for multi-point temperature monitoring. 🛠️⚡

🔹 Multi-Channel: Connect up to 8 heads to one box
🔹 Rugged Digital Link: No signal loss over long cable runs
🔹 Wide Range: Accurate measurements from -40°C to 1800°C
🔹 Smart Factory Ready: Profinet, EtherNet/IP, and Modbus TCP options

Scale your precision, not your costs.

Big Performance in a Tiny Package: The Raytek® Compact CI & CM.

Stop letting space constraints limit your precision. The Raytek Compact Series from Fluke Process Instruments delivers lab-grade infrared accuracy in a sensor small enough to fit anywhere.

Choose the CI for a simple, rugged thermocouple replacement, or upgrade to the CM for digital intelligence, RS232 connectivity, and 13:1 optics. Both feature IP65 stainless steel housings that thrive in heat without needing extra cooling. 🛠️⚡

🔹 Easy Integration: Replaces Type J/K thermocouples or 0-5V probes
🔹 Rugged: IP65/NEMA-4 stainless steel for harsh environments
🔹 Smart (CM Only): RS232, DataTemp software, and self-diagnostic LED
🔹 Miniature: The CM is one of the smallest stand-alone IR sensors on the market

Small size. Massive reliability.

Future-Proof Your Process: The Fluke Thermalert® 4.0.

High-performance temperature sensing meets Industry 4.0. The Thermalert 4.0 Series packs precision infrared technology into a rugged, stainless steel head that communicates directly with your factory network. Whether it’s analog, RS485, or EtherNet/IP, this sensor fits your infrastructure while delivering accurate data in temperatures up to 2300°C. 🛠️📊

🔹 Smart Connectivity: Supports PROFINET, EtherNet/IP, and HART
🔹 Rugged Power: Operates in 85°C ambient heat without cooling
🔹 Laser Precision: Integrated sighting for perfect target alignment
🔹 Fast & Accurate: Down to 10ms response for high-speed lines

Compact. Connected. Capable.

🔥 Precision in the Heart of the Heat: Fluke Endurance® Pyrometers.

When your process hits 3000°C, you don't just need a thermometer, you need an Endurance®. Designed by Fluke Process Instruments to survive the world’s harshest kilns and furnaces, these pyrometers give you a crystal-clear look at your thermal data via TTL video or laser sighting. 🛠️⚡

🔹 Ultra-Wide Range: 50°C all the way to 3200°C
🔹 Visual Control: Integrated video camera option for remote monitoring
🔹 Built Rugged: IP65 stainless steel withstands high ambient heat
🔹 Future-Proof: EtherNet/IP & Profinet ready for Industry 4.0

Backed by a 4-year warranty, it's the last pyrometer you'll ever need.

Precision meets durability: The Thermalert 4.0 Series.

When your process demands real-time, accurate temperature data in the toughest industrial conditions, the Thermalert 4.0 Series is your go-to solution. From metals and glass to plastics and food, these Industry 4.0-ready sensors deliver precision where other equipment fails. 🛠️⚡

🔹 Rugged stainless steel design (IP65 rated)
🔹 Industry 4.0 ready with Ethernet/Profinet support
🔹 Intrinsically safe models for hazardous environments
🔹 Wide range: -40°C to 2300°C

Smart sensing for the modern factory floor.