Safety Management In Kuwait

Earthquakes are not a frequent occurrence. However, they can be very disruptive because they occur suddenly and tend to affect large areas. Earthquakes can be a one-time event of a few seconds shaking or a series of events of varying duration.

Because earthquakes happen without warning, being prepared in advance is critical to minimize damages and loss. Consider these earthquake safety tips:

Before an Earthquake
Know your risk. Research the area and find out if you live near an active fault line and whether or not the ground around you is more susceptible to the effects of an earthquake.
Retrofit and reinforce your house. If you're in a high risk area, take steps to reinforce your house. Bolt your house to the foundation and reinforce support beams as needed. Secure any furniture such as bookshelves and cabinets to the walls to minimize risk of falling over during a quake. Secure cabinet doors to help keep dishes and other contents from falling out.
Create a disaster plan to protect yourself and your family. Earthquake preparedness can help reduce anxiety and minimize injury. Know where to take cover in your house and how to communicate with other family members after the earthquake if you're not together. Designate a safe place to meet outside of the house after the shaking stops.
Put together an emergency kit. Your kit should include non-perishable food, water, first aid supplies, flashlights, camping supplies (stove, battery-powered lantern, etc.), extra batteries, blankets and any personal items you may need (medications, toiletries, clothing). If you have pets, make sure they also have adequate supplies. Plan for a week's worth of supplies for each person. You'll need at least four gallons of drinking water per person for a week.
During an Earthquake
Stay away from windows and furniture that could potentially fall over. One of the biggest hazards during an earthquake is falling debris and furniture. Avoid areas in your house where you might be exposed to these hazards.
Take cover in a safe place in your house. Get under a sturdy table or desk to avoid being hit by anything. If you can't take safe cover, protect your head and neck with your arms.
Do not try and go outside until after the shaking stops. If you are already indoors, you are safer taking cover inside than attempting to leave your house during an earthquake you could be hit by falling debris as you're trying to get out.
After an Earthquake
Be prepared for aftershocks. Earthquakes are often followed by aftershocks additional quakes that follow the main event. These can last for days or even weeks after a major earthquake.
Check your gas lines and make sure there are no leaks. If you smell gas leaking, turn off the gas if possible and call the gas company. Do not use an open flame in your house until you are sure it is safe. Wait for the gas company to turn the gas back on.
Check for damaged electrical wiring. Shut off the power if you see damaged wiring in your house.
Keep your shoes on. You may have broken glass or spilled chemicals on the floor of your house as a result of the earthquake. Don't walk around barefoot until you're sure the floor is clean and safe.
Document the damage. If your insurance policy covers earthquake damage, make sure you take photos or video of the damage to use in the claim process.

5 TIPS FOR SAFETY CONSTRUCTION WORKERS TO AVOID STRESS & INJURY

1. Lift objects properly.

Back aches are every construction worker’s number one enemy. While it’s easy to get injured by carrying heavy loads, it’s not that hard to avoid this hazard altogether.

Remember to always bend your knees and to avoid twisting to the side when lifting. To maintain balance, put one foot slightly in front of the other.

2. Use ergonomically correct portable and high-powered tools.

Tools are supposed to make your life easier. Of course you know this but still you find yourself reaching out for the same hammer that puts a strain on your hand or those pliers that always slip from your grip.

You may not know it but by frequently using poorly designed tools, you could develop such conditions as carpal tunnel syndrome, tendonitis, white finger, and trigger finger.

Even powered tools can cause you serious problems with their high vibration and excessive noise. For this reason, employers must make sure that power tools they choose for workers not only have lower vibration but have a long trigger. They should also consider both left-handed and right-handed workers when selecting tools.

In the case of hand tools, employers or safety coordinators must choose those that need less force to use and do not strain the hand when you hold them tight. Hand tools must also be balanced and do not conduct heat or electricity.

3. Sit down when working at lower levels.

Avoid squatting or kneeling when you have to work at lower levels. By sitting on a stable stool, you avoid straining your knees and waist.

4. Keep your wrists in neutral.

Same goes with your arms. Otherwise, by the end of the shift, your body will be suffering from swelling, tingling, strains and pains. If things get worse, you could develop carpal tunnel syndrome.

5. Balance the weight of your tool belt.

Tool belts sure are small and handy but they have the ability to pull your body out of alignment. That is unless you keep its weight balanced. If you find that one side of your belt is heavier than the other, then make the necessary adjustments by transferring tools to the lighter side.

Working as a construction worker is much like being a superhero. Every day, you’re tasked with bearing heavy loads and using ultra cool equipment and tools. Riding in cranes and squatting on scaffolds put you so high in the sky that you almost feel like flying. But the same things that make construction job extraordinary could put you in a lot of stress. If you’re not too careful, you’d likely meet injuries along the way.

Fortunately, there are some safety measures you can follow to avoid common stress and injury in construction sites. Here they are:

1. Lift objects properly.

Back aches are every construction worker’s number one enemy. While it’s easy to get injured by carrying heavy loads, it’s not that hard to avoid this hazard altogether.

Remember to always bend your knees and to avoid twisting to the side when lifting. To maintain balance, put one foot slightly in front of the other.

2. Use ergonomically correct portable and high-powered tools.

Tools are supposed to make your life easier. Of course you know this but still you find yourself reaching out for the same hammer that puts a strain on your hand or those pliers that always slip from your grip.

You may not know it but by frequently using poorly designed tools, you could develop such conditions as carpal tunnel syndrome, tendonitis, white finger, and trigger finger.

Even powered tools can cause you serious problems with their high vibration and excessive noise. For this reason, employers must make sure that power tools they choose for workers not only have lower vibration but have a long trigger. They should also consider both left-handed and right-handed workers when selecting tools.

In the case of hand tools, employers or safety coordinators must choose those that need less force to use and do not strain the hand when you hold them tight. Hand tools must also be balanced and do not conduct heat or electricity.

3. Sit down when working at lower levels.

Avoid squatting or kneeling when you have to work at lower levels. By sitting on a stable stool, you avoid straining your knees and waist.

4. Keep your wrists in neutral.

Same goes with your arms. Otherwise, by the end of the shift, your body will be suffering from swelling, tingling, strains and pains. If things get worse, you could develop carpal tunnel syndrome.

5. Balance the weight of your tool belt.

Tool belts sure are small and handy but they have the ability to pull your body out of alignment. That is unless you keep its weight balanced. If you find that one side of your belt is heavier than the other, then make the necessary adjustments by transferring tools to the lighter side.

How do you spell Safety?
Safety
Means
Always
Remember
Teamwork