Keel Roll Forming Machine

Steel Keel Roll Forming Machine In India...
Company Name :- Gurukrupa Industries
Web :- http://rollformingmachine.in/
Call /Whatsapp :- +91 96011 55559
Mail :- [email protected]

Manufacturere of False Ceiling Roll Forming Machine, Ceiling Channel Making Machine, Pop Channel Machine, Gypsum Channel Making Machine, Intermediate Channel Roll Forming Machine, Pop Cross Section Machine. Gypsum Perameter Roll Forming Machine, Pop Bottom Patti Machine In Rajkot-Gujarat.

D coiler 250 KG cap.
Entry Gate with
Roll Forming Line with 8 station , 1 Gear Boxes & 5 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Technical Specifications
Maximum sheet width that can be formed : 450mm
Maximum sheet thickness in CRCA Strips that can be formed : 0.6 mm
Horizontal distance between shafts : 160
Number of forming stations : 8 nos.
Vertical station : 2 nos.
Total HP for Line : 7.5
Speed of the machine : 7mt/minit
Size of machine : 2300 x 1100 x 1100 mm
Mandrel Uncoiler
Coil weight : 250 KG Max
Coil width : 450 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

False Ceiling Machine | Ceiling Channel Roll Forming Machine | False Ceiling Section Machine False Ceiling Machine also called Gypsum Channel roll forming machine or Pop Channel Machine produced by this roll forming production line are mostly used in Building Design and other buildings segment.