PTsofts

www.ptsofts.com

win7 passward

2. Select the Administrator account that appear in the screen,
then enter command prompt.
Type: net user # # # 123456 and
enter ( # # # is the account name
which password you need to reset 123456 is the new password),
it will show you a message that” the command completed successfully.

www.ptsofts.com

serial key search

Find Serial Key Cracks
Finding Serial Key using Google :-Well Google is the best place to find Serial Key Cracks
for any software in just few minutes.You just need to search your item in right
way.Below is the one wonderful way to find Serial Key of almost any software.

1.To Get the serial number from Google you have to just follow these steps :
* Go to Google Search.
* In the search field type : “Your Software name” 94FBR
* Where, “Software Name” is the name of the software you want to find the serial number for.
* And in Google search Results you will get the list of all those websites where the serial key of the required software is available !!.

www.ptsofts.com

Dos Trick For Removing Bios Password

Here's a DOS trick for Windows 9x, that will reset (delete) your motherboard's BIOS password (aka CMOS password) without any need to open up your computer to remove the battery or mess with jumpers.

This method can come in very handy in the event you ever lose and forget your BIOS password or if you acquire used computers where the unknown previous owners had BIOS passwords set (in fact, this happened to me long ago—I was given a used computer, but there was no way I could enter the CMOS to make changes). It's important to note here that the password we are talking about is only the one that prevents a user from entering the BIOS setup at bootup, not the one that stops you from getting past the boot.

Normally, at bootup you can press a key (usually the DEL key) to access your BIOS allowing you to view it or make changes. With a password set, there is no way to enter setup. Though a password can provide a basic and very effective level of PC security, losing it can be a real headache if you don't know how to fix the problem.

The MS-DOS command that will makes this trick possible is the DEBUG command (debug itself is a utility—debug.exe—which is located in your Windows Command folder). This is not a command to be taken lightly—in other words, it's not a command to play with! You can cause serious corruption with this command and can end up not being able to even boot your computer! Debug is used to work with binary and executable files and allows you to alter (hex edit) the contents of a file or CPU register right down to the binary and byte level.

To begin debug mode, type debug at a MS-DOS prompt or you can specify a file, i.e., DEBUG FILE.EXE. There is a difference in screen output between the two methods. When you type DEBUG alone, debug responds with a hyphen (-) prompt waiting for you to enter commands. The second method, with a file specified, loads the file into memory and you type all the commands on the line used to start debug. In this tip, we will be writing to the BIOS, so the first method is the one that would be used. All debug commands can be aborted at any time by pressing CTRL/C.

Accessing BIOS with DEBUG

The basic trick will be to fool the BIOS into thinking there is a checksum error, in which case it resets itself, including the password. This is done by invalidating the CMOS and to do that we must know how to access the BIOS and where the checksum value of the CMOS is located so that we can change it. Access to the the BIOS content is via what are known as CMOS Ports and it's Port 70 and 71 that will give us the needed access. On almost all AT motherboards, the checksum is located at hexadecimal address 2e and 2f and filling the address 2e with ff is all you should have to do to invalidate the checksum.

Here's what to do if you ever need to reset the password and have no other method, and you don't want to open up your computer to remove the battery or jumpers.

Note! Do this at your own risk. I can only tell you that it has worked for me more than once and has worked for others as well. But I cannot make any guarantees. When I did this, I took a willing risk. The BIOS was Award Modular BIOS v4.51PG

Restart your computer in MS-DOS mode.

When you get to the C:\> or C:\WINDOWS> prompt, type DEBUG and press Enter.

A hyphen (-) prompt will appear waiting for you to enter commands.

Enter the following commands, pressing Enter after each one. Note: the o is the letter o and stands for OUTPUT.


o 70 2e


o 71 ff


q


After the q command (which stands for QUIT), enter Exit.

Then try to enter your BIOS at boot up. The password prompt should now be gone and you should now have full access to it again. However, you will now be at the default BIOS settting and may want to change them to your preference. You may also want to have your drives auto detected again.
In closing, I should state that in the case of a lost BIOS password, your first step should always be to contact your manufacturer to see if a backdoor password is available that will allow you to bypass the forgotten password.

There are many sites on the net that list backdoor passwords you can try, but beware that some BIOS that are set up to lock up if you enter the wrong password more than a certain number of times, usually only 3 times!

http://www.ptsofts.comd/

www.ptsofts.com
Jailbreak iOS 6 On iPhone, iPad, iPod Using Redsn0w
https://docs.google.com/file/d/0B9iOxbP5DEh9b0FIclpha0xFYUk/edit

www.ptsofts.com

1. The image you need to set as the background should be a .jpg file and it’s size should not exceed 245KB.

2. The image resolution can be anything of your choice. However I prefer 1440 x 900 or 1024 x 768. You can use any of the photo editing software such as Photoshop to compress and set the resolution for your image. Once you’re done, save this image as backgroundDefault.jpg.

3. You will need to copy this image to
C:\Windows\system32\oobe\info\backgrounds
You will need to create that path if it does not already exist on your computer.

4. Now open the Registry Editor (Start - Run -Type regedit) and navigate to the following key
HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\
LogonUI\Background
If Background does not exist rightclick LogonUI, select New and then Key, and then name it Background. Now locate OEMBackground (listed on the right side). If it does not exist, right-click Background and select New and then DWORD and name it OEMBackground.

5. Double-click on OEMBackground and set the Value Data to 1.

6. Now log-off to see the new logon screen background. If you would like to revert back to the default background, just set the Value Data back to 0.
I hope you like this trick. Just try out and give your feedback!

www.ptsofts.com

Bypass Blocked Website with Wallproxy 1 year, 3 months ago #112256

Before this, I never know about internet filtering but after enter university, I know the difficulty. I cannot access my favourite site like youtube and facebook. Gladly, there some proxy site out there to be used to bypass the web filtering. But, normally if university’s internet filtering is very strong, you cannot beat with it. Ultrasurf is slow like hell. So, I have one method to bypass the internet filtering even it is strong like China great firewall by using google application which faster and reliable.

We will use Wallproxy

Durations: ~25min
Tools:
Notepad++
Wallproxy (download here)LATEST!!

Part 1: Setting Up Google Application Account

1. First, you must have a google account. If you have gmail before means you have a google account. Go to https://appengine.google.com to create your application.

2. This is important! You will need to enter your mobile phone with your own country code. It will send verification code. Only 1 mobile phone per google application account.

3. If you successful, you will see this page, showing how much application (server) did you deploy to google application engine. The limit is 10 application (server) per google account. Click "Create Application" to create new application.

4. For application identifier, it is much like domain address. It must be unique. After done, click "Create Application" go to application dashboard.

Part 2: Configure and Use Wallproxy

Download Wallproxyhere for this tutorial. The webpage for this project is http://code.google.com/p/wallproxy-plugins/ . This project is updating. Don't scare by the chineseword . This is expected since it was developed by china programmer but all people around world can use it.

(a)Deploying

1. Extract Wallproxy. Make sure they are 2 folder (local & server) and 1 readme (written in chinese)

2. In wallproxy/server folder, run upload2.bat and you will introduced screenshot like below. There are about 6 options. First, we must set our application identifier name first to make sure the we deploy to our created server. To set the name, enter 1. Ex, application: myid.

3. Now, we successfully set it's time to deploy. Simply enter 3.

Enter your email address which you registered google application engine with. Enter password afterward.

4. If your deployed is successful you should see similar with this:

Enter 6 to exit....

To check your server working as it should, type # # #.appspot.com/simple2.py where # # # is your application identifier's name. It should redirect to http://twitter.com/ #!/hexieshe. If no problem, you can delete the server folder

(b)Configuring proxy.conf

Inside wallproxy/local folder, open proxy.conf with notepad++. Search for appid and type your application identifier inside the ''. Ex: appid = 'myid'. That is crucial thing to do.

cRunning Wallproxy

1. Browse wallproxy/local folder and simply run wallproxy.exe. It will minimize to system tray.

2. If you bored with it and want to close it, just right-click wallproxy icon in system tray and click the"below".

3. When you're run Wallproxy, your internet connection will automatically use proxy 127.0.0.1 with 8086 as port no. When you close it, the proxy will be reset to default.

4. For cases if you're still blocked probably, the program (games/browser/..) are using its own setting which it isn't not depend to windows internet connection. So, you must manually change the program's proxy setting.

For Browser
Firefox user: You must set it in firefox (Option->Advanced->Network->Connection:Setting). To make easy, you can install Elite Proxy Switcher addon.
IE,Chrome user: Never need to change anything

Q:I cannot download from Filehosting..This software is crap!
A:One of its weakness is it cannot download from filehosting.Thoughyou can only download from Megaupload. It's the only filehosting, wallproxy able to download.

Q:I can download from MU!? Wow, that's really great so I can download as many as possible?
A:Not really That's a catch. That goes same with streaming. Every application server has quota, 1GB per day. To use more than 1GB, create moreapplication server and deploy them. In appid in proxy.conf, just add the other application identifier (server's name) separated with '|'. EX: appid = 'myid1|myid2|myid3' so it make 3GB. See screenshot below.

Q:Why it looks so complicated?
A: I agree this method look complicated but it can be claimed as ultimate method after you fail bypass website through:
proxy
through port number


Q:Is there anymore advice you want to add up?
A:Yep, there are:

1.If you experience slowness in browsing (not because of internet) you can try reset server cache. While running wallproxy, type wallproxy/cache/reset in browser and you will see something about fetch info on browser. This prove you have clear server cache.

2. The golden download tips for MU: If you cannot download anymore, clear the server cache and delete browser history. Later, you manage to download it again

For the advanced uses, you can go to wiki page at http://code.google.com/p/wallproxy-plugins/. Use google translator

If there are problem, don't hesitate to ask