OBBA

Proceq Equotip Piccolo / Bambino 2
Overview
Fully integrated and handy Leeb hardness tester with a compact and robust housing. Ideally suited for quick on-site hardness tests. Optional DL probe for confined spaces and recessed surfaces. Equotip Piccolo 2 allows the transfer of the data to a PC.
For more details:https://www.proceq.com/compare/equotip-portable-hardness-testing/?fbclid=IwAR3wzB1qoAijKcVN4a1dgppKahX3WFfcQUVstTICgAKIjLtaijexZDb7yMo
Or contact OBBA

3m Compensating Cable Link With Thermocouple Plug To Plug For Temperature Recorder Input
Overview
To link a temperature controller/programmer thermocouple input to a temperature recorder input.

For more details: https://www.stork.com/en/cooperheat-equipment-shop/3m-compensating-cable-link-with-thermocouple-plug-to-plug-for-temperature-r
Or contact OBBA

60V, 60:16 CP Heating Element Repair Assembly
Overview
This heater repair assembly provides a cost effective method of repairing burnt out 60:16 nickel chrome heating elements by recycling heating element beads and connectors.

For more details: https://www.stork.com/en/cooperheat-equipment-shop/60v-6016-cp-heating-element-repair-assembly-one-6016-core-wire-with-welded
Or contact OBBA

Paint Test Paint Ferrous Probes
Overview
Non-Ferrous Probes for use with the Coating Thickness Meter.

Non-Ferrous Probes will measure all non-conductive, non-ferromagnetic coatings on conductive non-ferrous substrates.

Example: Paint on aluminium, paint on stainless steel and anodising on aluminium etc.

Calibration Certificate with traceability to UKAS is an optional extra.
For more details:https://paint-test-equipment.co.uk/product/non-ferrous-probes/?v=fbe46383db39
Or contact OBBA

Sonatest Masterscan 700m
Overview
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance.

Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.

The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.

Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.
For more details:https://sonatest.com/products/flaw-detectors/masterscan-700m
Or contact OBBA