Borsch Power

Received half our plastic/black Nylon orders end of last week. For some reason - slightly different to the 3 rounds of prototypes we've had so far.

Probably not noticeable for most people, but we're currently speaking with the manufacturer to see if they can squeeze out slightly higher quality.

If you're happy to wait a little longer - we'll update as soon as new batch is here and inspected.

Aluminium parts will also be coming with the new batch. Being a more expensive product, we wanted to make sure any potential issues are ironed out with the Nylon first.

Thank you for your patience! We're pretty excited about the quality we've seen in the previous orders, and hoping that you're as impressed with it once it's in your hands. ✨

𝐀 𝐪𝐮𝐢𝐜𝐤 𝐮𝐩𝐝𝐚𝐭𝐞. 𝐍𝐞𝐰 𝐩𝐫𝐢𝐜𝐢𝐧𝐠. 𝐔𝐩𝐝𝐚𝐭𝐞𝐝 𝐝𝐞𝐬𝐢𝐠𝐧.

We’ve got the first group's numbers roughly finalised. We'll start taking deposits now, and place our orders end of this week

If you’ve expressed interest, and we haven’t contacted you by the 25th Feb - please get in touch. Orders will close 26th Feb (this Sunday).

𝐏𝐫𝐢𝐜𝐢𝐧𝐠

We’ve got a fair bit of interest in THIS group buy - so:

- The black plastic holder price is coming down to $80 + $10 shipping Australia wide. (That's $55USD + $17USD for international shipping.)

- The Aluminium holder will come down to $150AUD ($105USD). Same shipping.

- We’re also looking into a cheaper, slightly lower-quality alternative. Testing will take ~4 weeks. There is a good chance it won’t be up to our standards…👀 no guarantees at this point.

Future group buys may have higher pricing, so if you’re on the fence - it’s potentially a good idea to jump on now, rather than miss out.

𝐔𝐩𝐝𝐚𝐭𝐞𝐝 𝐝𝐞𝐬𝐢𝐠𝐧

Even with extensive prototyping, there are always improvements to be made. The OEM fuel door sticker was peeking out from behind our cap holder. As nice as the holder was, the sticker took away from the OEM+ look. So we killed it. And then just covered it up... 🙊

It’s basically the same beautiful holder, now with our logo on the side, covering up the remainder of the sticker. Looks great, and no need to peel factory stickers.

(If you liked the previous design - let us know, we can still supply it for you.)

The new design also opens up space for...

𝐂𝐮𝐬𝐭𝐨𝐦 𝐭𝐞𝐱𝐭?!

It is very cool to have a few S402 owners in the group buy. Even a few replica S402s (putting two aside for James and Paul). A number of tbSti owners have also requested the “Sti” logo.

Those two logos are already drawn up, and free to add to your order. Custom text will cost an additional $10.

If you would like something written - please specify during your order/deposit. Be as specific as possible. Text, size, font, etc. We’ll do our best to make it work nicely.

𝐏𝐚𝐲𝐦𝐞𝐧𝐭 𝐚𝐧𝐝 𝐄𝐓𝐀

Cash on pick up or Bank Transfer are preferred. PayPal is fine, please don’t forget they have a 3% processing fee.

We’re hoping to get the orders shipped out by the 12th of March (~2 weeks from now). We’ll contact you for full payment once we have the parts in our hands.

…

Ok! *wipes sweat off brow* That just about covers it.

Please get in touch by the 26th Feb to place your orders and deposits. We can’t guarantee pricing or wait times for any future group runs.

❤️

𝐓𝐡𝐢𝐬 𝐩𝐨𝐬𝐭 𝐢𝐬 𝐚 𝐜𝐚𝐥𝐥 𝐟𝐨𝐫 𝐞𝐱𝐩𝐫𝐞𝐬𝐬𝐢𝐨𝐧 𝐨𝐟 𝐢𝐧𝐭𝐞𝐫𝐞𝐬𝐭.

Hey guys, we’re pretty excited about this one. Finally something nice to hold your Gen4 Liberty/Legacy fuel cap, while you fill up.

The OEM strap was an afterthought. A trinket instead of a fix. It either dangles the cap against your car’s paintwork, or it snaps completely.

Our criteria for a proper solution:
- Holds the cap safely, away from scuffing paint
- Quick to use. Simple to install.
- Lasts the life of the vehicle
- Stands up to any climate (hot or cold, wet or dry)
- Be chemically resistant (fuel, oil, solvent, water, salt, etc)
- Nice to look at. A quality piece in presentation, as well as function

After a number of designs, prototyping, testing and going through various manufacturing and material options - this holder ticks all the boxes. It’s very satisfying to so easily hang the cap (and very nice to feel and look at 😅😍).

𝐓𝐡𝐢𝐬 𝐩𝐨𝐬𝐭 𝐢𝐬 𝐚 𝐜𝐚𝐥𝐥 𝐟𝐨𝐫 𝐞𝐱𝐩𝐫𝐞𝐬𝐬𝐢𝐨𝐧 𝐨𝐟 𝐢𝐧𝐭𝐞𝐫𝐞𝐬𝐭. 𝐏𝐥𝐞𝐚𝐬𝐞 𝐥𝐞𝐭 𝐮𝐬 𝐤𝐧𝐨𝐰 𝐢𝐟 𝐲𝐨𝐮’𝐝 𝐥𝐢𝐤𝐞 𝐨𝐧𝐞. If we get enough numbers we may be able to bring the prices down.

Options are as follows:

𝐁𝐥𝐚𝐜𝐤 𝐭𝐞𝐱𝐭𝐮𝐫𝐞𝐝 𝐩𝐥𝐚𝐬𝐭𝐢𝐜 - 𝐀𝐔𝐃$𝟗𝟗 ($20 deposit, to secure yours in 2-5 weeks)

If you want to get even fancier, we can also make them in Aluminium:

𝐀𝐥𝐮𝐦𝐢𝐧𝐢𝐮𝐦, 𝐫𝐚𝐰 𝐟𝐢𝐧𝐢𝐬𝐡 - 𝐀𝐔𝐃$𝟏𝟔𝟓 ($65 deposit)

Australian members - allow +$10 shipping Aus-wide. International - please DM us for a quote.
..

We’ll be making a few more posts about these. Please follow our Borsch Power page, so you don’t miss the updates.