HDCabling

https://www.hdcabling.co.za/product/hdbitt-hdmi-over-single-fiber-optic-cable-extender-balun-up-to-20km-with-infrared-ir-remote-control-blaster-eyes-1080p-1920-x-1080/
ONLY R3990.00incl!

HDBitT HDMI over Fiber Optic Cable Extender / Balun up to 40km | LKV752.

Fiber Cables to be used with HDMI over Fiber extenders is at LC to LC Fiber Cables.

Note!! This Fiber Extender Set can use any Fiber or copper SFP. It has a BiDi (Bi-Directional) Single Mode Simplex SFP set included as at 3km Single Mode Bi-Directional SFP Transceiver Module SET for transmission distances up to 3km. If longer ranges required the SFP set needs to be replaced by one that allows longer transmission distances. Multimode SFP’s can also be used on this HDBitT Fiber Extender.

Technical Specifications:

Power Adapter: DC 5V 2A (for TX and RX)
DDC signal voltage: 5Vp-p
Transmission speed: 1.25 Gbps
Supported HDMI input Resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz.
Supported HDMI output Resolutions: 480p@60Hz, 576p@50Hz, 720p@50/60Hz, 1080p@50/60Hz.
Centre wavelength: 1310nm
Connecting interface: SFP – GE – BIDI – 40km – T1550/R1310 – LC – I – D10.
Fibre type: Single mode fibre
Linked circuit loss: 15dB
output power: 10dBm
Receive sensitivity: 33dBm
IR remote control supports: 38kHz
Power Consumption: TX: 5W RX: 5W
Dimension: 13 x 8.5x 2.4cm

https://www.hdcabling.co.za/product/120mm-pc-led-fan-kit-3-fans-with-controller-and-remote-rgb-computer-case-cooling-fan-kit-coolmoon/
ONLY R359.00incl!

120mm PC LED Fan Kit (3 Fans) with Controller and Remote | RGB Computer Case Cooling Fan Kit | Coolmoon.

Description:

Noise: 23 dBA
Air Volume: 33.5CFM±10% (Max)
Fan Speed: 1200rpm
Serving Life: 30000H
Length of the Cables from Fans to Controller : 500mm
Bearing: Hydraulic Bearing
Dimensions: 120*120*25mm / 4.7 * 4.7 * 1 inch

Features:

Dual LED Ring Fan.
Flowing light function.
12 static monochrome modes, cool style, convenient for customers to choose.
9 large sickle-shaped fan blades, stable airflow, low noise and large air volume.
About 30,000 hours of service life, strong magnetic silent hydraulic bearings.
The rubber shock absorber Fan Casing effectively reduces noise and keeps the fan stable.
With a music controller, it supports 5VARGB divine light synchronization, each lamp bead supports motherboard software programming to customize 16 million colors, and the lighting is delicate and soft.

The LED Controller on this product uses a MOLEX Power connector from your PC Power supply. If you only have SATA and no Molex connectors use the adapter cable below to provide power to the Controller which powers all the fans and LED Bars/Strips.

https://www.hdcabling.co.za/product/wireless-bluetooth-headphones-with-noise-dampening-feature-jite-innovative-m10/
ONLY R490.00incl!

Wireless Bluetooth Headphones with Noise Suppression Feature | Jite Innovative M10.

Product Specifications:

Brand: JITE Innovative
Model Number: M-10
Version: V6.0
Driver Unit: Φ40 mm
Battery Capacity: 400 mAh
Charging Time: About 1.5 hours
Play Time: ±30 hours
Noise Reduction Playback Time: ± 25 hours – External Noise reduction / Noise Suppression button needs to be activated on the headphone. This feature allows almost zero dB environmental external sounds to be heard while wearing the headset.
Standby Time: About 50 hours (if not switched off)
Frequency Range: 20 Hz – 20 kHz
Noise Reduction Depth: 27 ± 2 dB
Transmission Distance: 10 meters
Charging Port: Type-C

Attention / Notes:

Applying excessive pressure to the earpiece may injure the outer ear. Do not wear the headset while sleeping or in situations where pressure may be applied.
Keep the headset clean and free of earwax buildup to maintain performance.
Clean with a soft, dry cloth only. Do not use solvents, chemicals, or chemically treated cleaning cloths.