Engineered Source Inc

🚧These custom precision machined stepped pins were manufactured using 1020 steel material with the larger diameter set to .156" +/-.001 and the smaller diameter at .092" +/-.002. The overall length measured 1.09" +/-.01 and the point incorporated a radius of R.078. Material certs were provided with the parts per customer requirements.

⚙️These custom precision machined weld studs were manufactured in mild carbon steel material with eventual copper flash plating prior to use on the production floor. Overall length of the weld stud is 20.02mm and the single projection measures .75mm diameter by .80mm length. UNC-2B thread was rolled on the threaded section and samples were manufactured for our customer to test prior to full production.

🚀These custom AN316C8R jam nuts were manufactured domestically using DFARS compliant material to the AN316C8R specifications. 316 stainless steel hex bar stock was used for the production and parts went through NADCAP certified passivation per AMS QQ-P-35 with additional Proof Load lab testing per FF-N-836E to meet 12,000 lbf minimum criteria. Full certs were provided with the parts per customer requirements.