SkyLinK

enerator Repair & Maintenance Course
9. Welding Course
10.Car Dent / Paint Course
11.Driving Course
12.Shorthand Course

Mobile Phone Repair Course
After completing the course one will be able to repair minor as well as major handset faults. The Course includes:
* How to disassemble & assemble different types of cell phones.
* Identifying different parts of mobiles.
* Tools used for mobile phone repairing.
* How to use different tools used for mobile repairing.
* Work of different parts & ICs.
* Jumpering Techniques.
* Techniques used to repair (troubleshooting) different faults up to chip- level.
* Course includes use of tools & instruments used in cell phone repairing, Motherboard Introduction, Assembling & disassembling, Working on SMD / BGA ICs and the PCB, Fault finding & troubleshooting, Repairing procedure for fixing different hardware and advanced faults and Software (including Flashing, Formatting, Unlocking, Use of secret codes and Downloading). Computer Science Courses
(Information Technology)::
This course will enable the pass outs to work as trainee programmer / database operator, database assistant in the banks, Government, semi Government, private organizations, institutions and software houses. At the end of the training, trainee will be able to:
1. Setup a computer and install software (Hardware & Software).
2. Have acquired a typing speed of 30-40 wpm.
3. Office Automation (MS. Prepare and manipulate spreadsheets, develop and run computer presentations.
5. Apply fundamental usage of computer applications.
6. Use internet and E-mail.
7. Use computer in standalone / network environment
8. Develop entry level programs like data entry, inventory control programs.
9. Web Page Designing
10. In page
11.Autocad
12.Corel draw
Computer Courses Also Includes:
History of Computers, Different Types of Computer Networks (Hub, Switch & Router), Network Protocols, Network Topologies, OSI Model, CISCO Three Layer Model, Super Computers, Wi-Fi & many more. Auto Mechanic Course:
After Training at Sky Link, the trainees attain the proficiency in the following tasks and skills:
1- Proper selection, use and safety measures of tools, and equipment for repair and maintenance of the cars.
2- Overhaul the carburetor and EFI engines and their main components.
3- Troubleshoot the following systems of cars. (i) Fuel system (ii) Lubrication system (iii) Exhaust system (iv) Brake system (v) Ignition system (vi) Electric system (vii) Cooling system (viii) Power transmission system (ix) Suspension system
4- Carry out the routine maintenance of cars and performed tuning of cars.
5- Remove, inspect, replace and service of different parts/components of cars. Meet the customers demand of fasted reliable. Service to upload the moral values and observe good. After completion of trainees, trainees spend two months at the relevant workshops as On Job Training and observe practical use of the skill he learnt at the Sky Link. After the completion of the course, the trainees become able to Work in a manufacturing Industry/ assembling plants of cars, Work in repair/Service shops of cars, Start and establish own shop of cars repair/service/maintenance. Auto Electrician Course
MAJOR:
1. Fault finding and rectification of electrical systems of cars / vehicles.
2. Repair / service and maintenance of batteries, CNG and EFI system.
3. Installation and repair/maintenance of electrical using in cases and vesicles.
4. Installation and maintenance of batteries.
5. Installation and repair maintenance of security and alarm and power windows system.
6. Installation and repair maintenance of wind shield wiper and washing system.
7. Installation and repair maintenance of electrical gauges and sending unites.
8. Installation and repair maintenance of forms and pre heating relays.
9. Installation and replacement and fuses and circles weapons and cars and vesicles. After the training there are two months of on job training at the actual workshop where the trainees use their acquired skill in actual working environment. The pass outs of this course are able to work in manufacturing industries /assembly plants of cars /vehicle/motorcycles, Works in repairing service shop of cars, Start own shops of auto electrician of cars motor cycles services maintenance. AC / Refrigerator Repair & Maintenance Course::
The Course Includes:
1. Tools Introduction
2. Pressure Gauge
3. Refrigerant
4. Refrigeration Basics
5. Compressor
6. Condenser
7. Cooling Coil
8. Cooling Tower
9. Use of Copper Tube
10.Control Switch
11.Lubrication
12.Air Conditioning
13.Fan
14.Capacitor
15.Motor
16.Window AC
17.Split AC
18.Steam Jet System
19.Absorption System
20.Heat Load Calculation


Home Appliances Repair Course::
Provision of formal training in appliance repair and electronics and training on good customer service skills. Installation and repair home appliances such as Juicers, dishwashers, washers and dryers, ranges, microwave ovens, TV, Food Factories, Sandwich Makers, Electric kettles, Iron etc. Problems with major home appliances, To determine the cause of the failure, checking for unusual noises, excessive vibration, leakage of fluid, or loose parts. Disassembling of appliances to examine its internal parts for signs of wear or corrosion. Follow up of service manual diagnostic procedures and use of testing devices such as ammeters, voltmeters, and watt meters to check electrical systems for shorts and faulty connections. After identifying problems, replacement or repair of defective belts, motors, heating elements, switches, gears, or other items. Tightening, align, clean, and lubrication of necessary parts. Use of common hand tools, including screwdrivers, wrenches, files, and pliers, as well as soldering guns and tools designed for specific appliances. Training on appliances with electronic parts which often require new circuit boards or other electronic components. UPS / Stabilizer Making, Repair & Maintenance Course::
SkyLink offers making & economical repair of UPS and Stabilizer units. Troubleshooting all aspects of UPS, battery condition and replacement, battery charging circuits, power stages, rectification/SCR, logic and control stages. Training on Voltage stabilization, magnetic saturation of the cores of transformers and reactors, Single-phase and three-phase stabilizers for alternating voltage, direct voltage & predominantly semiconductor devices. Fault identification and solution. Generator Repair & Maintenance Course::
Skylink provides the following training:
•Inspections of all lube levels
•Inspect and Replace of Oil Filter, Fuel Filter, Air Filter (if necessary)
•Drain and Replace Oil
•Check all hoses and assure hoses are securely fastened
•Inspect control panel and assure correct operation
•Inspect all spark plugs and clean, adjust or replace if necessary
•Inspect all ignition points and clean, adjust or replace if necessary
•Inspect and clean fuel sediment bowls
•Inspect fuel lines for any rust or sludge
•Check engine frequencies
•Check all electrical connections, charging rates and output voltages
•Inspect batter condition
•Inspect automatic transfer switch and assure correct operation
•Electric motor repair
•Motor rewind
•Electrical safety testing and inspection


Welding Course::
Welding Course Contents are:
Fusion welding processes; typical weld defects; types of steel; carbon-manganese, low alloy and stainless steels, hardening of steels, weld ability, heat treatment, parent metal defects, visual inspection,; testing parent metals and welds, destructive tests, codes and standards; outline of safe working practices, practice in examination questions, continuous and end-of-course assessment. Car Dent / Paint Course::
We offer the following two courses in this regards:
Paint less Dent Removal Training:
What is PDR ??? Using the PDR (paint less Dent Removal) process, a skilled technician with specially designed hand tools, uses a method of ‘gently manipulating the metal or dented area back into its original form, without affecting the original paint finish, GUARANTEED. Objective:
To provide students with the skills and knowledge to become a successful PDR (Paint less Dent Removal) technician. Paint Perfecting and Touch-up Training:
What is Paint Perfecting? Our Paint Perfecting and Touch-Up System is an innovative approach to rejuvenating vehicles paintwork without the need for expensive resprays. The process restores unsightly clear coat scratches, watermarks, oxidation, overspray, minor blemishes and stone chips. Objective:
To provide students with the skills and knowledge to become a successful Automotive Cosmetic Paint Repairer, specializing in paint rejuvenation, scratch removal and touch-up. Driving Course::
SkyLink prepares a new driver to obtain a learner's permit or driver's license. Training on Traffic codes, Laws and vehicle operation. Teaching of driving skills in dangerous conditions such as road conditions, driver impairments, and hazardous weather. Instructional videos are also shown, demonstrating proper driving strategies and the consequences for not observing the rules. Receiving qualified drivers training at SkyLink means you'll learn all the latest safe-driving and defensive driving techniques as well as the vital skills needed to handle a car. Shorthand Course::
Whether you are a student, a journalist, an employer, a PA, or simply want to enhance your writing skills, there is a Shorthand course here for you at SkyLink.