Sentrum Engineering Services Private Limited

Deep Foundation Load Capacity Evaluation with Static Load Testing

Sentrum Engineering Services offers comprehensive Static Load Testing (SLT) to verify foundation design assumptions related to axial compression, axial tension, and lateral load performance of deep foundation elements. Static Load Tests are conducted to evaluate ultimate load capacity, load–transfer behavior, and foundation deformation characteristics under controlled loading conditions.

Our services include both highly instrumented static load tests for detailed design verification and routine static load tests for construction quality assurance. Based on project requirements and foundation type, Sentrum Engineering Services installs advanced instrumentation such as vibrating wire strain gauges, resistance strain gauges, vibrating wire piezometers, pressure cells, load cells, LVDTs, inclinometers, and ShapeAccelArrays to accurately monitor foundation behavior.

All instrumentation data are collected using multi-channel data loggers and integrated with conventional measurements of applied load and foundation displacement to deliver reliable, high-quality results for design validation and performance assessment.

For Contact

Chief Executive officer
Muhammad Waqas Javed
Phd Scholar - Master of Science
University of Oslo Norway
[email protected]
[email protected]
+92 323 42 42 0 23
+92 313 64 54 0 23
Head Office: 232-A, Block-J, LDA Avenue 1, Lahore, Pakistan

Non-destructive concrete testing

SES steps in during the rehabilitation of the building with specialized services and routine testing of construction materials. As it is difficult to rehabilitate the old building constructed on old standards firstly we need to know the existing building strength.

We are offering the following widely used non-destructive test

 Sonic Integrity Test (SIT)

 Rebound Hammer or Schmidt Hammer Test

 Ultrasonic Pulse Velocity (UPV) Test

 Ultrasonic Cross Hole Testing of Deep Foundations

 LEEB Hardness Test of Steel

For Contact
Chief Executive officer
Muhammad Waqas Javed
Phd Scholar - Master of GeoScience
University of Oslo Norway
[email protected]
+92 323 42 42 0 23
+92 313 64 54 0 23
Head Office: 232-A, Block-J, LDA Avenue 1, Lahore, Pakistan

Non-destructive concrete testing

SES steps in during the rehabilitation of the building with specialized services and routine testing of construction materials. As it is difficult to rehabilitate the old building constructed on old standards firstly we need to know the existing building strength. Therefore, SES offers non destructive tests of the old building to evaluate the strength of the present building. Moreover, SES is specialized in doing quality control of newer buildings across the country using methods described by Building Codes of Pakistan.

We are offering the following widely used non-destructive test

 Sonic Integrity Test (SIT)
 Rebound Hammer or Schmidt Hammer Test
 Ultrasonic Pulse Velocity (UPV) Test
 Ultrasonic Cross Hole Testing of Deep Foundations
 LEEB Hardness Test of Steel

For Contact
Chief Executive officer
Muhammad Waqas Javed
Phd Scholar - Master of GeoScience
University of Oslo Norway
[email protected]
+92 323 42 42 0 23
+92 313 64 54 0 23
Head Office: 232-A, Block-J, LDA Avenue 1, Lahore, Pakistan