Inte-Auto Connector

Hybrid Connectors (Mixed Signal/Power/Data in One Interface)

A common design challenge: too many ports, not enough space—and every extra connector increases assembly time and failure points.

Our hybrid push-pull connectors help combine multiple media (signal/power/data) into one interface.

What it solves
• Reduces port count and panel complexity
• Simplifies wiring and assembly steps
• Supports compact designs with high connection density
• Push-pull operation for fast serviceability

Where it adds value
• Compact industrial controllers
• Medical/beauty devices with modular accessories
• Systems that need both power and signals in one plug

My practical note
• Hybrid is not about “more pins”—it’s about cleaner system architecture.
Define the interface early (power budget, signal types, shielding needs), then build the cable assembly as a controlled system.

If you’re trying to reduce panel ports or simplify harness routing, send your power + signal list. We’ll propose a hybrid interface and a customized cable solution.

HR10 Series Miniature Camera Connectors (Push-Pull, Multi-Key)

Small camera and imaging systems often need connectors that are compact, fast to handle, and resistant to mis-mating.

HR10 Series provides a miniature push-pull interface with multi-key guidance for more reliable connection in the field.

What it solves
• Push-pull coupling for fast connect/disconnect
• Multi-key structure to reduce wrong mating during blind connection
• Compact size for tight device layouts

Typical scenarios
• Imaging modules and compact camera systems
• Portable inspection devices
• Equipment requiring frequent setup and teardown

What I usually verify
• Cable routing and strain relief (very common failure point in small builds)
• Connector orientation and operator handling steps
• The full cable assembly stack-up (connector + cable + overmold + labeling)

If you’re building a compact imaging device and want a stable connection experience, send your mechanical constraints + pin requirement. We’ll suggest the HR10 option and a production-ready cable assembly.

TP Series (SP13/SP17/SP21) Threaded IP68 Waterproof Circular Connectors

For outdoor or high-moisture installations, threaded coupling is still one of the most dependable ways to keep a connection stable over time.

Our TP Series (SP13/SP17/SP21) offers threaded circular waterproof connectors for cable-to-cable and cable-to-panel builds.

What it solves
• IP68 sealing for harsh environments
• Threaded coupling for secure mechanical retention
• Practical sizes for different cable OD ranges
• Good fit for power + signal in outdoor equipment

Where it’s commonly applied
• Outdoor communications and control systems
• Lighting, security, and field equipment
• Systems exposed to rain, dust, or cleaning

My practMy pract reminder
• Specify the connector and the cable entry details (OD, jacket, bend protection).
That’s what determines long-term sealing and strain relief performance.

If you need an IP68 threaded option and want it delivered as a ready-to-install harness, send your pin count + cable OD + mounting style.

WF Series Push-In Fast Locking (IP67)
When operators need fast connection but still require a rugged interface, “push-in fast locking” can be a very efficient compromise.

WF Series uses a push-in locking mechanism and is rated IP67 for demanding environments.

What it solves
• Quick connect/disconnect for field efficiency
• Solid mechanical retention for vibration-prone conditions
• IP67 sealing for harsh use scenarios
• Suitable for panel installation designs

Where it fits
• Industrial equipment with frequent maintenance
• Outdoor or semi-outdoor control systems
• Devices that need a rugged quick-lock interface

My selection note
• Define the user workflow: how they connect, with gloves or not, in low visibility or not.
Connector usability often matters as much as specifications.

If WF-style fast locking is on your shortlist, message me your environment + handling steps. We’ll propose the correct WF size and a matching cable assembly.

www.inte-auto.com

Customized Cable Solutions (Connector + Cable = One Controlled System)

Many field failures blamed on “connectors” are actually caused by the cable: bend stress, poor strain relief, inconsistent overmolding, or incorrect pin mapping.

At INTE-AUTO, we build push-pull connectors + customized cable assemblies as one controlled solution.

What it solves
• Reduces wiring errors and assembly variation
• Improves strain relief and long-term reliability
• Enables faster installation and service
• Supports labeling, overmold, shielding, and routing requirements

Where it adds value
• Communication equipment with defined harness standards
• Medical/beauty devices with modular accessories
• Test systems where repeatability is critical

My project rule
• Lock the interface early: connector series + pinout + cable spec + usage environment.
Then build a cable assembly that matches real operator behavior—not just CAD assumptions.

If you want samples quickly, tell me your connector series + length + wire spec + overmold needs.
Samples are ready to ship.
www.inte-auto.com

Coaxial (S & E Series) Push-Pull Coax Connectors

When signal integrity matters, “almost right” is still wrong—especially in measurement, imaging, or broadcast-type workflows.

Our S & E Series coaxial push-pull connectors focus on stable transmission with quick operation.

What it solves
• Push-pull handling—fast connect/disconnect without twisting
• Coax interface for applications sensitive to loss/noise
• Better repeatability for systems that reconnect frequently

Where I see demand
• Test & measurement setups
• Imaging systems and signal transmission modules
• Broadcast-related equipment requiring consistent performance

What I ask customers first
• Cable type and connector interface requirements
• Mating cycle expectations (how many times per day/week)
• Mechanical constraints (strain relief is often overlooked)

If you’re troubleshooting unstable coax performance, sometimes the connector/cable interface is the root cause. Share your application + cable spec, and we can recommend the right coax option and a matching cable assembly.

www.inte-auto.com

S Series Half-Moon Connectors (Foolproof Alignment)

Mis-mating is one of those problems that seems “rare” until you scale production or put equipment into real operators’ hands.

Our S Series half-moon connectors are designed to make alignment more intuitive and reduce connection mistakes in fast-paced use.

What it solves
• Clear orientation during mating—helps reduce wrong insertion attempts
• Stable interface for repeated connect/disconnect scenarios
• Good option when operators connect by feel (not by sight)

Where it works well
• Portable instruments and field devices
• Medical/beauty equipment with frequent accessory swapping
• Systems where setup speed matters

My experience-based tip
• If your device will be used by non-technical operators, prioritize keying/guide structure as much as electrical specs.
That’s often the difference between “works in lab” and “works in the field.”

If you want a connector choice that lowers user error without adding complexity, message me your use scenario + mating frequency—we’ll suggest an S Series option and a robust cable build.
www.inte-auto.com

F Series Circular Push-Pull (Compact, Versatile)

For compact equipment, the connector is often the bottleneck: limited space, repeated plug/unplug, and operators who don’t have time to “line it up perfectly.”

13-F Series is a compact circular push-pull option that balances size, handling, and reliability for everyday equipment builds.

What it solves
• Fast connection with push-pull convenience
• Compact form factor for portable or space-limited designs
• Practical for frequent handling during setup/maintenance

Typical applications I see
• Inspection devices and handheld instruments
• Control boxes and test fixtures
• Medical/beauty devices with modular accessories

What I check first
• Pin count + signal type (power, signal, mixed)
• Panel layout (receptacle choice impacts assembly time)
• Cable routing (right-angle vs straight often saves space)

If you’re designing a compact device and need a connector that’s easy for users to handle, share your pin count + mechanical constraints. We can propose a 13-F configuration and a matching customized cable solution.
www.inte-auto.com

K Series Waterproof Push-Pull (IP66–IP68)

Water and dust rarely “kill” a connector instantly—most failures come from gradual ingress, corrosion, or unstable contact resistance.

K Series is our waterproof push-pull family designed for harsh environments where sealing is not optional.

What it solves
• IP66–IP68 sealing for outdoor, washdown, and humid conditions
• Push-pull operation for fast connection even with gloves
• Keying options to reduce cross-mating in multi-port designs
• Shielding support for systems with EMI/EMC constraints

Where it fits well
• Outdoor communications equipment
• Industrial controllers exposed to dust/moisture
• Medical/beauty devices that require routine cleaning

My practical selection note
• IP rating is only half the story—confirm cable OD, strain relief, and the sealing interface at the panel.
That’s usually where real-world leakage starts.

If you’re unsure whether you need IP67 or IP68, send your exposure scenario + cleaning method. I’ll help you choose the right K Series build and a cable assembly that keeps the seal consistent.

www.inte-auto.com

B Series Push-Pull Connectors (Self-Latching, Multipole)

If your device gets unplugged “just once” during a test or a procedure, you already know the cost of a loose connection.

B Series is our go-to push-pull self-latching solution for multipole signal/power interfaces where speed and repeatability matter.

What it solves
• Quick mate/unmate without twisting—helpful for tight panels and frequent handling
• Secure latching to reduce accidental disconnects
• Multiple keying options to lower mis-mating risk during blind connection
• Metal-shell design with shielding options for EMC-sensitive systems

Where I see it used most
• Test & measurement rigs
• Industrial automation and inspection equipment
• Medical/beauty devices that need fast setup and reliable contact

How I usually specify it
• Start from pin count + mating cycles + shielding need
• Then confirm panel style + cable OD/strain relief (this is where most projects slip)

If you’re selecting a push-pull connector for a new build, message me your pinout + environment—we’ll suggest the best B Series configuration and matching cable solution.

www.inte-auto.com

Hashtags: