AFC Services

This was the most complicated bit of f**kery ive ever had to do

Just to make windows go up and down, seal and look decent

Chopped roofs look cool but they make window fitting an absolute nightmare

And in the no buck LS spirit...that's a Lincoln Mark 8 oil pan on a 4.8
Made 3/16 x1.25" rails, welded them to the pan that's been stretched 36 mm and it sits pretty flat even before I plane it
Factory windage tray and a hybrid LS front/ 4.6 rear pickup tube and we're good Jerry

Cost $9.15 and about 2 hours of my valuable time

Turbo LS in the moostang...so if you use a 4.6 4v power steering pump and thin alternator on a fancy AFC bracket the alternator drops about 6 inches from the factory stuff

The snoot tube goes down to the air to water intercooler,the heat exchanger is a rad from a 99 civic and the ice box is a Heineken mini keg

Gonna slick up the ugly ass intake manifold, drop in some 42 lb injectors and send it

Spent about 5000 hours on this thing at bjorns place.mostly on the steering linkage but also built this nifty sloppy 2 cammed 5.3 and did some other stuff
It runs,sounds great and goes into gear but maybe no test drives quite yet