Bunny_Operator

The ARIC and RAP experiment continues.

I was unable to get my 13.9 Mid to function 100% with either the C or C- variant. has the C variant that functioned 100% with 12.5 Car, so I opined that Carbine gas might be the way to go.

The result was a spare parts bin upper build using a Centurion Arms 12.5 Car barrel w/ FSB. I opted to use their legacy CMR cutout handguard and RRA riser for a unique "vibe" and I think it turned out eye-pleasing with the EXPS3-1. The dot only config is growing on me.

The optic centerline is at 3.25" and close to a 1.7" riser config. I cannot use the irons without removing the optic, so I might swap to the XPS variant or a different optic setup later if I care enough.

Also, shout out to and for the superb 3P15 Plan B muzzle device. It's one of my favorites.

Check out RD's https://silencerresource.com/ for solid MD/Suppressor data.

Range Report:
Carbine gas did the job and the C- variant was functioning unsuppressed. I did try a few rounds suppressed (standard pressure) but it was definitely gassy and punchy as expected. I have the C variant in currently and will field that next time out to confirm function.

Note that the C and C- variants are not intended to be used suppressed, so I've also reached out to the ARIC engineer to request the M variant as it has additional vents to counter the increased gas.

I'm glad that I got this working and can move on to further experimentation like maybe 300 BO and low pressure cans.

I want this to be successful because this setup is such a vibe paired with the AX556/ADAC lower.

That is all for now. Deuces.

See my profile for additional codes and resources. Help support the good folks who support us.
2A Resources

Vibes

Affiliations

"bunny"
"bunny10"
"bunnyoperator"
"bunny15"
"bunny"
"bunny"and.atac "BUNNY13"
*Disclaimer: No fi****ms or ammunition sales.

The Venom Enclosed is a solid, affordable option for anyone that wants a "no frills" enclosed RDS but it has a taller deck height than its Defender cousin, so I questioned if it would affect the use of aftermarket plates. The Defender comes with an MOS specific plate (IMO is very good as is and an upgrade isn't necessary) but the Venom Enclosed does not.

The DPP/EFLX MOS plate was used as the sample. I like FCD because I know they use drawings from the OEMs vs reverse engineering, which gives me confidence that it very likely isn't the plate if something goes wrong. Also, I've known and worked with Roger for years and understand how he thinks. Thank you for this demo unit, Roger.

FCD had already addressed the Defender and XL series in their product description and I've confirmed that the instructions carry over to the Venom Enclosed. Use the Vortex supplied M4x0.7 9.8mm screws and they will be recessed-flush to the plate (see photos 3 & 4). The 11mm screws are too long in this example and will protrude past the plate causing damage since the screws don't pass through into the slide. Adjust according to your specific platform.

The combo sits perfect on the RXM experiment. I didn't like how the OEM RXM slide felt, so I applied a G***k 17 Gen 3 slide using the adapter. Shout out to for the initial idea. It is basically a 17 Gen 6 "the long way" given the single spring 19 RSA.

Current impressions:
- I should've had front serrations applied when doing the MOS race cut but tape is fine for now.
- Would benefit from extended mag release and slide stop
- I want more grip weight

That is all. Thanks for reading. Deuces.

See my profile for additional codes and other resources. Help support the good folks who support us.
2A Resources

Vibes

Affiliations

"bunny"
"bunny10"
"bunnyoperator"
"bunny15"
"bunny"
"bunny"and.atac "BUNNY13"

Resource highlight. Bookmark this.

was instrumental in assisting the homie at IG account recovery after Meta nuked it without warning. The process was painless and basically hands-off once the details were provided.

OSD is a grassroots 2A resource group started by folks with a wide range of experience from inside and outside the industry. I was quite impressed.

One of the founders is our high-vibes homie over at (my favorite shirt is the Kiki's Armed Delivery Service).

Check out their site for resources and the "about" page to learn more about the team. Sign up for the newsletter. If you need assistance reach out.

https://opensourcedefense.com/about

Thank you again for your help. You're a bunch of solid dudes.

See my profile for additional codes and resources. Help support the good folks who support us.
Affiliations

"bunny"
"bunny10"
"bunnyoperator"
"bunny15"
"bunny"
"bunny"and.atac "BUNNY13"
*Disclaimer: No fi****ms or ammunition sales.